Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Even with a slightly high weather, it is possible that you still want to use the stove on cold nights this spring. Or you may prepare to spend more time outdoors around your backyard Hole. Either way, you will need some firewood to keep things. Heat cuts have been present since the dawn of civilization. Although this process has changed dramatically over the years, as the modern era is exposed to the prosecution in service to harvest firewood, including mine.
I was helping cutting firewood for myself or others since I was a child, and when I was older for my saw, it was like anyone else around me: the gas works. But after years of dealing with a small joint engine conflicts, I got an electric saw as a gift from my wife. After some initial doubts, I now turned firmly. Let me tell you why.
1. Safety
Battery leaflets provide quieter operation and improve safety features on gas models.
Cut the firewood can be very dangerous, regardless of the saw you use. From dealing with fallen trees to the dangers of stumbling, with 36,000 infections related to the saw every yearAny edge you can get to make the process safer is vital. Battle leaflets provide a safer alternative to gas leaflets in some major areas.
First, perhaps my favorite part of the use of the electric saw, is that the saw almost immediately stops when it is available out of the suffocating. The traditional saw chain often continues to rotate, sometimes very slowly, and at other times, slightly faster. This is usually due to a weak saw that needs to be modified very high to prevent the tool from gossip and death.
Electrical lesions are more clean for gas models, but still dirty due to the strip oil that is still necessary.
Second, you do not deal with combustible materials. While the saw fires are rare, there is always an additional risk of fires when gasoline is present. Not to mention the leakage chaos when filling the fuel tank and ensuring that you have the oil ratio to the suitable fuel for the two -stroke engine.
In addition to these safety features, batteries also come with all other safety features in their gas counterparts, such as serial brakes, double players and more. Amazing Husquvarna Power Ax 350i I was also using a Boost button, which increases the energy by 25 %.
Although this may not be considered a safety advantage, when cutting a knot in a tree, the leaflets will often try to tie and leave you. Increasing energy when you hit this stain can help cut and reduce the chance of hunting and returning to you.
2. Al -Safa
The calm operation of the electric saw compared to gas models is a welcome improvement.
I can put this in the safety section, but it is important for me that it deserves its own section. As mentioned above, when you leave a brutal saw with a battery saw, the series stops almost completely immediately. Although this is great to avoid harming yourself by mistake or someone else, this also means that there is no sound.
Since electrical lesions are devices upon request that only need energy when driving the chain, they are completely silent until the time is to cut. This silence helps to focus on the task and makes communication with others on the workplace much better.
These leaflets are also quieter when working. Husquvarna 350i power is quiet when cutting, but I have Greenworks 40V sawIt is quieter. Since the engine does not shoot and works on high RPMS, all the battery -running saw you hear is a slight moan of the engine, and the chain that revolves around the tape and wood is cut.
3. Less maintenance
The battery saw uses the same chains and bars like a gas -style model.
One of my peeves people has long been small engines. It is always a battle when I need to start a gas grass, the chain saw, the sheet of the leaves, the series’s feature or anything like that. After that, if you start, it is a game to adjust it to keep it. This is not the case with battery -running tools.
The only maintenance needed for these leaflets are those that cannot be avoided that are transferred from traditional leaflets: sharpen the chain and keep the tape oil full. Since these leaflets use the same chains on gas leaflets, the sharpening process and their occurrence are the same. The same applies to the used tape oil.
But you do not have to tamper with ignition plugs, air filters, fuel, pride, etc. As long as your series is sharp, you have east oil and charged battery; Share ready to go whenever you need to cut.
The chain modification of the battery -powered chain is as it is for the traditional saw.
The largest negative aspect of the battery -running saws are the battery. Although Axqvarna Power Ax 350i lasts much longer than Saw Greenworks, I cut three complete trees with 350i to those that contain the Greenworks model and cut off anything I needed. There is still a limited time before the battery is recharged. This is not a problem in most situations in which one tree is cut or something like that. But if you go out for a full day of registration, you will need a file The second battery To keep work continuously.
I was completely affected by the Husquvarna 350i power when cutting firewood. When I first used it, I quickly put my reservations about if it would be strong enough to cut green wood into solid oak wood. The battery continued through three trees before it came to put it on the charger, but this was time for me to rest and divide the records while recharging it.
As for the cost, the pricing is often similar between gas and electricity. The cost of Husquvarna Power Ax 350i is $ 480 of MSRP, gas model, Husquvarna 440, $ 379. In addition to the cost of the saw, you should also think that you will buy a gas and bilateral oil as long as you use the saw. Although you will not get this continuous cost of the electrical model, if you want a file The second batteryYou look at nearly the price of the saw and the battery.
