I have tested 12 cases Nintendo Switch 2 and this is the best

You may find that it is sad to put a hard -to -self -acquired tool in a preventive case. For me, it is liberated. Using a condition relieves me that it will accumulate tons of small scratches. Therefore, I was not missed at any time to test cases on the new Nintendo Switch 2And it didn’t take long for me to find one I think it’s best.

I have tried several types of cases on key 2. I have tested fake shells that slide or slide on key 2 to provide a simple and aesthetic barrier from scratches to the control and joy unit. I have also tried minimal cases with one function: protecting the console when it is not in use.

I have just included my high standards for adequate models made to fit the 2 key while using it. However, the Zip-UP/Clasp strip is lower. They only need to protect the console, ideally, provide additional value, such as a cable pocket or cartridge.

For my favorite situation, I did not want to make any major concessions; I wanted to have a good position to put the mobile as is the case at the sidewalk, so I think Dbrand Killswitch It is the best model in general. I have published a Full review of KillswitchBut the slim is that although it may be more expensive than some people may hope to pay, the level of protection and diversity they provide is worth the cost.

The best switching status 2 for both mobile and pavement play

The lower cost layer of killing It costs $ 59.95 It includes a rear cover for the console and a small piece to adhere to the KKSTAND for a matching style, as well as Grips Joy-Con 2, all holding safely to each component. It also includes the skin for your devices. There is no piece of Killswitch that looks like it will stick to the occasion.

Unfortunately, the Switch 2 console condition makes it impossible to fit the dock. However, the DBRAND transformer includes the alternative solution that suits it, and works mainly as a USB-C expand. It is a fairly elegant solution that is intended. The only downside is that it leaves the Switch 2 exposed screen instead of hiding it by the plastic wall in the dock. It is somewhat boycotting, but I am ready to tolerate it because it allows key 2 to keep atmospheric functions.

The layer recommended for most Switch 2 players (especially those who throw the console in a bag) is the “travel” layer of $ 79.85, which includes a semi -transparent travel cover that protects the front of your control unit during transit, or only to keep safe when you do not use it. The cover is suitable for the front of the control unit equipped with the continuation of Killswitch, and to secure the back with a Bunji wire latch. This layer also includes a pair of analog stick and a tray with 10 switch cartridges and fits accurately inside the travel cover.

When this post originally went, the DBRAND was in the midst of the Killswitch update so that the Joy-Con 2S magnet was not allowed to separate without pressing their release buttons. Basically, if the KillsWitch key is borne in parallel with the ground only by any of the Joy-Con 2 consolation units and giving it vibration, it is possible that the entire control unit part is possible, which may lead to severe damage to the console. DBRAND The Joy-Con 2 Grips To fix the problem, the former buyers can request a free replacement. In the future buyers will receive Killswitch with an updated and improved grip.

Genke attack transmission In some respects, the issue is similar to Killswitch, as it consists of three pieces: one revolves around the console, two pieces that adhere to both the Joy-Con 2 consolation units. $ 49.99 set It improves Killswitch with a switched standard fist that comes in three sizes to allow you to customize how Joy-Con 2 fits in your hand. It follows a small, medium and large model, as it adds the smallest simple comfortable benefits, and the largest that big people can make to make Switch 2 comfortable. Her large fist, which looks good for its use like Killswitch, but it is a very close race and I will also be fond of use.

However, one of the prominent negative aspects with the attack header is that the Joy-Con 2 sleeves can be easily relative, unlike DBRAND. Its fit, technically, and will not fall during normal use. But it is not safe as I want to be.

Also, Genki announces that you can keep the attack header when entering your Dock Switch 2 console, but the launch unit does not work as intended. GENKI complained about the forums that the issue is not perfectly proportional to the control unit, and is working on a repair that is expected to be charged in late July. You will charge an alternative component for all those who have already bought the case, and those who buy the case will receive the firm product.

The best cases of slim protection switch 2

Power a slim zip-up For Switch 2 is a simple and inexpensive way to keep your console is safe when you don’t use it. It is not a difficult condition, so you will not escape catastrophic damage, but it is a good choice if you don’t want to add a set of weight. To this end, it’s one of the thinnest cases you have tried.

In the fair 19.99 dollars (Half cost Nintendo’s official issueThe protection will be sufficient, but it provides a safe storage of up to 10 alteration cartridges as well. The cartridge holder contains a soft bottom that protects the screen, and it can also fold it in a tent, allowing the 2 switch to rest against it (the 2 key already has a kickstand for this purpose).

This condition does not have a common negative feature among other skinny cases (some of which are more stable than Powera’s): to be able to press the Joy-Con 2 control stick from the outside. Other cases may allow your key 2 to suffer from some damage to the control stick without knowing you, but not this, as well as those mentioned below.

For another $ 10 ($ 29.99), The slim Bilkin case The best appearance of Powera’s is made with better materials. It contains a large mesh pregnancy belt, a secret room for Apple Aartag or similar Bluetooth follower, all of which lack the Powera case. The BELKIN can carry 12 cartridges, which is a little thicker than Powera, which is likely to compensate for any cables or small tools that may overcome them in its pocket. It features deep grooves to suit Joy-Con 2 players, and its external peel prevents cross-polls on control clips. It comes in dark gray, generous, and fun green shade.

Belkin sells a $ 69.99 version of its slim condition, which features everything above and includes a 20,000 mAh battery to keep the Switch 2 charged key while it is inside the box. The company says the battery can charge the console completely 1.5 times. The battery produces a thicker box, and its dedicated cabin only contains the specified Belkin model that has been included, so you will not be able to switch in a different battery and faster charging. None of these may be the breach of deals for you, but it is worth considering.

JSAux makes the Zip-up Switch 2 Switch Switch 2 box that completely emanates in color. The expression is its main attractiveness, like this The case of $ 25.99 Return on other features you may want. Once it opens, all that can be seen is the Velcro belt that fixes your switch 2. Under it there is a fabric box confined to the box that can carry 12 cartridges. Like Belkin and Powera cases, this condition prevents accidental pressure on Joy-Con 2 through its shell. It is very light on the features that must be widely recommended, and they are thicker than other models.

Jenke’s case of $ 42.99 he very A difficult soft condition. Wool wool shell does not contain nearly other skinny cases. In addition, the screen guard can carry up to 18 cartridges. However, I do not like the Switch 2 move when the situation is shaken (the suitability is warm if you have a condition of the company’s attacker equipped). It is worth noting that Neil Tarti from Jenke, who takes over the relationships between marketing and media, participated with him freedom This error in production may affect the quality of the work of its clouds in the long run, and that the free reform will come in late July to all who have already bought. Reform will be implemented for all buyers in the future in the case.

“Our sleeping condition has been upgraded to a waterproof cloud at the last minute and is not known to our production team, the adhesives used were not well binding on the police. (…) While the case is still solid rock, the weak point will be the glue that carries everything in place.”

The best shells suitable for formation for switch 2 in mobile mode

the Killswitch It is the best condition for a lambian position as it allows you to remove the Joy-Con 2 consoles and include an easy-to-connect converter to the dock. In addition, it provides Kickstand access.

If you don’t never Plan to connect your 2 key to its berth or separate it from joy, or it will be a rare event, you can choose a whole one in one that fits perfectly about the console. Each corner will protect your switch 2 of strokes and scratches, and you may keep it safe if a decrease occurs.

the $ 29.99 Spigen rugged shield It is a suitable option. It fits every corner and switching outlet 2, with amplifiers and air loudspeakers. He gets the reward points for the installation around the edges of Joy-Con 2 while providing a more clear grip, which may serve as a blessing for those who suffer from hand or wrist pain while carrying the mobile control unit. However, as observed, you will need to remove the condition in order to install the 2 key in the original dock.

the Jsaux division of protection status

This issue is characterized by many of the characteristics that I love in DBRAND Killswitch much less ($ 29.99 for $ 59.99), even by overcoming it by the ability to put the original dock from Switch 2 without the need for an adapter. I am looking to test it when it is launched.

the Tomtoc Froz Edition Slim Case

I think my choices for difficult Zip-ups are good, but I am keen to try the most playful Tomtoc version of The Slim Case for the Switch 2.

Update, July 17: Details of the modified pricing as necessary. Also, the DBRAND Killswitch section notes that the company has shared details about the Joy-Con reform.